|
|
| · Dispatch · Alert Notification · Service Products · Consulting · |
|
|
|
| · Dispatch · Alert Notification · Service Products · Consulting · |
|
Low-cost Fire Station Alerting
Fully programmable Alert Receiver monitors frequency of your choice 24/7 for up to four tone alert signals. Provides audible and visual alert, and two relays to control external devices, such as bell/siren, lights, etc. Opens squelch for voice information. Flashing LED continues until reset. <rear view>
Ideal for for EOC, public safety, fire stations, first responders, schools, home or business.
|
|
ON/OFF/ VOLUME CONTROL - Turns on receiver and adjusts speaker to
desired volume.
SQUELCH CONTROL - Adjusts the amount of signal required to open the
speaker while in the monitor mode.
TONE/ MONITOR SWITCH - Selects whether you want tone coded
messages only (switch out), or monitor all traffic on your frequency (switch
pressed in).
RESET SWITCH - Depress this switch to mute the speaker, stop the alert
LED from flashing, or manually reset the relays.
POWER/ ALERT LED - Indicates power is turned on when the LED is solid
red. The LED flashes to indicate the unit has been activated. The LED
continues to flash until the RESET switch is pressed.
ANTENNA JACK - Connector for telescoping antenna (included) or optional outdoor antenna for long-range reception.
EXTERNAL SPEAKER JACK - May be connected to PA system. If an external speaker is used, the internal speaker will disconnect.
POWER JACK - Use the wall mount power supply shipped with the
receiver or the optional DC power cord.
RELAY CONTACTS - Timed relay contacts for controlling external
devices such as lights, PA, bell, etc.
< SPECIFICATIONS >
** 1-year parts & labor warranty **
Safe, secure shopping with PayPal. You do *NOT* need a PayPal account.
Please allow 2-4 weeks for delivery.
| All prices in US Dollars (USD) | |
ComTekk Alert ReceiverWith two-tone decoder, triggers on * Includes 2 programmable relays, can be triggered by different tones. FREE Programming Included! ($14.95 S&H added - continental US only) |
only $359 |
Alert Receiver (no relays) Two alerts can be triggered by 2 different tone sets. FREE Programming Included! ($14.95 S&H added - continental US only) |
$329
|
Accessories & Options |
|
External Battery Backup Keeps your receiver functioning for several hours in the event of a power failure. ($5.00 S&H added) |
$39.95
|
DTMF Decoder Receiver alert activated by DTMF sequence. |
$99.95 |
2-Tone Decoder with CTCSS Receiver alert activated by tone + CTCSS. |
$89.95 |
Programming Kit For customer programming of receiver and decoders. Technical expertise required - use at your own risk! ($5.00 S&H added) |
$69.95
|
SPECIFICATIONS
| Size | 5 1/2"~615116"x 1518" |
| Weight | 1 Ib. 1 oz. |
| Power | 13.8 VDC |
| Antenna | External (supplied) 50 ohm z |
| Frequency | Low 29-54 MHz |
| High 136-1 74 MHz | |
| UHF 406-512 MHz | |
| RF Sensitivity | 0.3uV 29-52 MHz |
| (nominal) 0.4uV 136-174 MHz | |
| 0.4uV 406-512 MHz | |
| 0.9uV 108.000-136.975 MHz | |
| Audio Output | 2 watts maximum |
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Alert receivers manufactured for ComTekk by Veetronix, Inc.
< ORDER INFO >
We believe in giving back to those who made the ultimate sacrifice for their communites.
ComTekk is a proud supporter of the
National Fallen Firefighters Foundation.
Products | Downloads | Pricing | Order | Help | Subscribe | Contact | Privacy
Copyright © 2005-2011 ComTekk & BW Consultants. All rights reserved
Alert Notifier
Order
Downloads
Instant emergency alerts for Fire/EMS